Your Key to the
PK Alliance
T10 robotic system owners are the only users on the planet with access to Trinity Black via the PK Alliance global partner network.
T10
Line Source
Maximum SPL
146 dB
Horizontal Directivity
60°-120° Robotic Directivity
Frequency Response
40 Hz-20 kHz
Robotic Actuator Duty Cycle
80,000 Actuations (109 years)
T10 is a member of the industry’s first robotically controlled line source family. Stunning SPL and clarity can be precisely controlled in both the vertical and horizontal planes, offering system operators maximum flexibility in making coverage adjustments after the array is flown. Onboard inclinometers and network-based Auto-Array within PK .dynamics software enable each module to recognize its position and angle within the system, improving accuracy, efficiency of deployment, and safety.
Dual bandpass-loaded 10” transducers manage low-frequency response. The mid-frequency band is supported by two 6.5” midrange transducers affixed to the patented Coherent Midrange Integrator (CMI). A dual-diaphragm high-frequency transducer, coupled directly to an integrated planar waveguide, significantly reduces distortion across the high-frequency band. A 3,000 W Class D amplifier maximizes headroom while maintaining crystal clear audio and exceptional output.
The CMI Waveguide seamlessly combines mid and high frequencies, working in tandem with precisely spaced low-frequency apertures for smooth and controlled directivity. It allows for variable adjustability from 60°-120° both symmetrically and asymmetrically so that system designers and technicians can remotely shape the radial directivity of the array relative to the coverage requirements of any event or venue.
Flown straight, the array’s directivity is then configured remotely using industrial linear actuators with a duty cycle of up to 109 years. Horizontal angles can be set to over 30 variable positions allowing for mechanical optimization. Vertical angles are variable with 0.1° accuracy. Finally, a combination of FIR and IIR filters is applied to ensure smooth frequency response throughout the listening area.
Dual bandpass-loaded 10” transducers manage low-frequency response. The mid-frequency band is supported by two 6.5” midrange transducers affixed to the patented Coherent Midrange Integrator (CMI). A dual-diaphragm high-frequency transducer, coupled directly to an integrated planar waveguide, significantly reduces distortion across the high-frequency band. A 3,000 W Class D amplifier maximizes headroom while maintaining crystal clear audio and exceptional output.
The CMI Waveguide seamlessly combines mid and high frequencies, working in tandem with precisely spaced low-frequency apertures for smooth and controlled directivity. It allows for variable adjustability from 60°-120° both symmetrically and asymmetrically so that system designers and technicians can remotely shape the radial directivity of the array relative to the coverage requirements of any event or venue.
Flown straight, the array’s directivity is then configured remotely using industrial linear actuators with a duty cycle of up to 109 years. Horizontal angles can be set to over 30 variable positions allowing for mechanical optimization. Vertical angles are variable with 0.1° accuracy. Finally, a combination of FIR and IIR filters is applied to ensure smooth frequency response throughout the listening area.
Frequency Response
40 Hz-20 kHz
Horizontal Directivity
60°-120° Robotic Directivity
Horizontal Resolution
5° Symmetric & Asymmetric
Vertical Adjustment
0°-12° Robotic Directivity
Vertical Resolution
0.1° Increments
Horizontal Thrust
750 N
Vertical Thrust
2500 N
IP Rating
IP69K (static), IP66 (dynamic)
Duty Cycle
80,000 Actuations (109 years)
Low Frequency
2 x 10" Neodymium Bandpass Loaded
Mid Frequency
2 x 6.5" on Coherent Midrange Integrator
High Frequency
1 x 4" Dual Diaphragm Planar Wave
Amplifier
4-Channel Class D
Amplifier Power
3000 W
Operating Voltage
Auto-Switching 100-240 V, 50/60 Hz
Power Consumption
700 W
Network
Proprietary
Input Selection
Analog/AES
Audio/Network
Multipin Amphenol – IP65
Power
powerCON TRUE1 – IP65
Weight
47.6 kg/105 lb.
W x H x D (mm)
980 x 250 x 561
W x H x D (in)
38.58 x 9.84 x 22.09
Max Line Length
24 Modules
Environmental
IP42 (front), IP43 (rear)
Multipin Connector
IP65
Module Construction
Void-Free, High-Grade Baltic Birch
Rigging Construction
6061-T6 Aluminum
External Coating
EXL Polyurea
Grill
Powder Coated Aluminum
* Maximum SPL with Pink Noise Crest Factor 4 at 1 m (with limiters & DSP active)t10a
t10c
t10-network
pk-alliance-hub
t10 suspension frame
t10 downfill adapter
delta plate
t10 cart
imgt10 cover top wrap
Discover T10
Own your robotic advantage
T10 medium-format robotic array elements offer incredible versatility for mid-to-large sized events where long throw is required.
Outfitted with the most advanced components on the market, including industrial-grade robotic actuators, onboard electronics and DSP, inclinometers, IR sensors, and the patented Coherent Midrange Integrator (CMI) Waveguide, T10 brings the technological advantage of the world's first robotic line source system to the widest-possible array of projects.